Technical Data; Troubleshooting - Black & Decker FSS1600 Original Instructions Manual

Technical data

Voltage V
ac
Power
W
Tank capacity ml
Weight kg

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Black & Decker repair agent.
Problem Step Possible solutions
Check the unit is plugged in at the wall
The hand held 1
socket.
steam cleaner is
not turning on.
Check the unit is switched on using the on/
2
off switch (1).
3
Check the fuse in the plug.
The hand held steam cleaner has a lock off
No steam is being 4
feature. Lift the lock off switch (2) and pull
produced from the
the trigger switch (3). After a few seconds
hand held steam
steam will be produced.
cleaner when the
trigger is pulled.
5
Check that the water tank (5) is full.
NOTE: When first filled or after running dry it
can take up to 45 seconds for steam to be
produced.
6 Check steps 1, then 2, then 3.
The hand held 7 Check steps 5, then3.
steam cleaner
stops producing
steam during use.
The hand held 8 Check step 5.
steam cleaner is
The hand held steam cleaner will begin to
9
producing too little
produce steam after 15 seconds and will
steam during use.
reach maximum steam flow after 45
seconds.
Refer to the assembly chapter of the manual
The accessories 10
for correct fitting instructions of all parts and
keep falling off the
accessories.
unit.
Refer to the assembly chapter of the manual
Steam is escaping 11
for correct fitting instructions of all parts and
from unexpected
accessories.
areas of the unit.
FSS1600
(Type 1)
230
1600
350
2.5
(Original instructions)
Problem Step Possible solutions
Where can I get 12 www.blackanddecker.co.uk/steammop
further information www.blackanddecker.ie/steammop
/ accessories for
my steam mop.
ENGLISH
5