Rear Panel; Connecting Video - Entone Amulet 500 Series Quick Start Manual

amulet — rear Panel
1 2 3 4
Name
cable/aNt in
1
tV Out
2
composite Video
3
audio
4
component
5
Video
ir extender Port
6
digital audio
7
Hdmi
8
ethernet
9
uSb
10
Power
11
* Features may vary dependent on your service provider. contact your service
8
provider for more details.
8 9
5 7
6
Description
For connecting to a cable tV or antenna source.
(tuner is an optional item)
For connecting to an rF tV for loop-through.
(this is an optional item)
For connecting to a standard-definition tV (SdtV).
Stereo audio output (left / right).
For connecting to a high-definition tV (HdtV).
For connecting an ir extender receiver.
For connecting to an entertainment system that sup-
ports 5.1 Surround Sound audio.
For connecting to a high-definition tV (HdtV).
For connecting to a wired network.
to connect uSb devices such as uSb flash drive and
external uSb hard drive.
(max 500ma load)
dc power jack (100-240V, Output 12V/3a).
SteP 1: cONNectiNG VideO
amulet provides up to four video options for connecting
11
to your tV: Hdmi, component Video, composite Video and
coaxial. Select a video option then proceed to"connecting
audio" on page 13.
make sure your tV is turned on and the correct video input is
selected.
10
Option 1: Hdmi (recommended)
if your tV has an Hdmi connection,
use an Hdmi cable (may not be
included) and connect amulet to the Hdmi iN port on your tV.
this connection provides both video and audio so you do not
need a separate audio connection. Proceed to
"connecting tV Source" on page 15.
delivers the best video & audio
quality via a single cable
cable is optional and
may not be included
S-VideO
9