Connecting Devices To Your Network Through The Range Extender - Linksys N300 User Manual

a) Enter the extender's PIN into the appropriate field on the router's Wi- Fi
Protected Setup screen. Click Register. When the connection is complete,
the Wi-Fi Protected Setup light on the extender will be solid for 10 seconds.
If you have a dual-band router you will do this again to extend the second
network. The 2.4 GHz band will be extended first
b)
Click OK.
Connecting devices to your network through the range
extender
Repeat the instructions for each client device that supports Wi-Fi Protected Setup.
1. Connecting with the Wi-Fi Protected Setup Button
a) Press the Wi-Fi Protected Setup button on the client device.
b) Click the Wi-Fi Protected Setup button on the extender's Wi-Fi Protected Setup
screen, OR press and hold the Wi-Fi Protected Setup button on the side of the
extender for one second. When the connection is complete, the Wi-Fi Protected
Setup light on the extender will be solid for 10 seconds.
c) If using the extender's Wi-Fi Protected Setup screen, be sure to click OK within
two minutes or you will have to start over.
2. Connecting with the client device's PIN
14