Philips BDL4221V/00 Service Manual page 104

104
420WN6 LCD TV
Go to cover page
3.3.4.3 CVBS output :
3.3.4.4
3.3.5 Picture in Picture
3.3.5.1 Display function
3.3.5.2 Display size
3.3.5.3 Display location
3.3.5.4 Picture by Picture
3.3.5.5 Zoom
portion of the entire image to be shown. The ID will be designated as A1, A2, B1, B2,
42"BDS WXGA TFT LCD Monitor/TV
TYPE
BRAND : PHILIPS
2005-06-10
Freud Yu
GENERAL PRODUCT SPECIFICATION
Location : Rear down side
Specification
Audio L/R output ( from CVBS source )
Connector type : RCA Jack
ESD-protected : 15 kV
Headphone output :
Audio: R/L output 10mW at 32ohm.
3.5mm stereo jack with switch
Impedance is between 8 and 600
* PIP can only be functional for video and TV monitors.
* PIP factory default is CVBS video input.
* A black PIP display window will be shown if there is no video signal input while PIP on.
* There are 4 different size of PIP, Small , medium , large and PBP
* Press PIP key to start up the picture-in-picture display in small size. They will be operated
in a carousel sequence:
* PIP OFF > PIP small > PIP medium > PIP large > PBP > PIP OFF >. . .
* The location of PIP should be adjustable and be at the four corners of the monitor.
* Press Menu key and select the PIP item in Feature menu, then access DISPLAY for PIP
location adjustment.
* The display is equally divided into two parts, one displays PC graphics, and
another displays video input. This selection item can be under PIP selection to
reduce complexity of the menu.
* Four zoom modes will be provided: 4x4, 3x3, 2x2, and 1x5.
* Zoom ID: Users can use either RS232C or OSD (via remote control) to select which
: 420WN6VB/00
2005-06-10
Video - CVBS output. 1 Vpp ( from CVBS source )
- Impedance : 75ohm.
- Nominal : 0.5 V rms.
- Maximum : 1.5 V rms.
-Impedance > 10Kohm.
8639 000 16494
590
45
26