Access The Axis Product; Calibrate The Ptz Mechanics; The Live View Page - Axis P5544 Installation Manual

Page 18

Access the Axis Product

Use the software provided on the Installation and Management Software CD to assign an IP
address, set the password and access the video stream.

Calibrate the PTZ Mechanics

Calibrate the PTZ mechanics using the PTZ calibration tool, which starts automatically when you
access the product the first time or after resetting to factory default.
PTZ calibration aligns the overview mode and normal mode coordinate systems so that each point
in the overview is mapped to the correct point in the normal mode image.
PTZ calibration may be necessary for various reasons during the lifetime of the product, for example
when the top cover has been removed and remounted. To calibrate the PTZ mechanics, go to
Basic Setup or System Options > Maintenance and click Calibrate PTZ. For more information, see
the User Manual available at www.axis.com

The Live View Page

The product's Live View page appears in your browser. Click Setup to open the product's Setup
pages, which allow you to customize the Axis product.
The Live View page can be used in overview mode or normal mode. For more information, see the
User Manual available at www.axis.com
Setup - Provides all the tools for
configuring the product to
requirements.
AXIS P5544 Installation Guide
Help - Displays online help on
all aspects of using the camera.