Sony SLV-D985P AZ Operating Instructions Manual page 61

4
Press B/b to select an item.
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
The default setting is indicated in bold print.
• Dolby Digital
Selects the type of Dolby Digital signal.
D-PCM
Dolby Digital
• MPEG
Selects the type of MPEG audio signal.
PCM
MPEG
• DTS
Selects whether or not to output DTS signals.
Off
On
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack.
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
continued
61
Audio Setup