Table of Contents
Advertisement
5. Separate the battery cover and the battery case assy.
1
To Remove the main PCB and the LCD unit
6. Remove one screw and four connectors, and then unsolder five lead wires.
Precautions during assembly: Make sure the connectors are fitted completry.
Blue
Yellow
Gray
7. Remove the main PCB and the LCD unit.
8. Remove the connector, and separate the main PCB and the LCD unit.
Precautions during assembly: Lace two lead wires through the B-FRAME.
2
Screw
Connectors
— 19 —
Battery case assy
Battery cover
Red
Black
Connector
Advertisement
Table of Contents
