Haier LE32C13200 Service Manual page 41

3.2 Check the F/W version on the fifth row of the factory mode info(eg,the "Ver" info is V1.09). If F/W version is
incorrect, please check the version of F/W in your USB memory, else let's go to Step 3.3. Take the LE22H168 for
example:
3.3 If F/W version is correct, press 'down' Key to choose 'Reset to Def' option (The option will be highlighted). Then
press 'OK' Key to active 'Reset to Def'.
3.4 When "Reset to Def" show"Done", then press 'down' Key to choose 'exit' option and press 'OK' Key to be off
factory mode.
DDC Upgrade
As the DDC data were included in the software, this model do not need a separate DDC upgrade.
Figure 3.3
Figure 3.2
Figure 3.5
42
Figure 3.4