Troubleshooting - Machine Will Not Start; Troubleshooting - Touch Panel Issues - Vision Fitness t80 Classic Service Manual

3.5 TROUBLESHOOTING – System Will Not Start
1) SYMPTOM:
a. LCD displays back light, but the system does not start up.
b. The LCD backlight is lit, but the Vision Logo never clears, the LCD displays nothing.
2) SOLUTION:
a.
Replace the console.
3.6 TROUBLESHOOTING – Touch Panel Issues
Touch panel issues
1) SYMPTOM:
a. Touch screen is not accurate or invalid.
2) SOLUTION:
a. If the touch screen is not accurate, or has a slight deviation, simply press the
screen calibration mode.
b. If the touch screen calibration does not work,
deformation. If so, replace the entire console.
c. If not, confirm whether the touch screen, FPC wire is well-connected with the main board.
d. If well-connected, recalibrate the touch screen (same steps as (a)), if the screen cannot be calibrated, replace
the console.
CHAPTER 3: Troubleshooting
check the touch screen for visible damage, indentation, or
TP connect on the main board
TP FPC wire
CHAPTER 3: Troubleshooting
"Enter" and "Stop" keys to enter the
29