•
If your authentication method is Open System and your encryption mode is None, go to the next step.
6. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at
device.
Related Information
•
Additional Methods of Configuring Your Brother Machine for a Wireless Network
•
How to Enter Text on Your Brother Machine
•
Wireless LAN Report Error Codes
support.brother.com
to install drivers and software necessary for operating your
110