HEADSET OVERVIEW ① Power switch ② Volume up & Next song ③ Volume down & Previous song ④ Microphone ⑤ LED Indicator Light ⑥ Charging socket OPENNING INSTRUCTIONS Charging the headset 1.Your headset uses a rechargeable built-in battery,make sure the headset is fully charged before using it for the first time.
2. Activate the Bluetooth feature on your phone and search for the headset. 3. Select the headset (Lenco BH-100 ) from the list of devices found by your phone. 4. When pairing successfully,the indicator light will stop flashing,the blue indicator light flashes once every 3 seconds in standby mode.
TECHNISCHE DATEN ITEM SPECIFICATIONS Driver Unit 10 mm Impedance Ohms Frequency Response 20 Hz to 20KHz 88±5dB Rated Power 3 mW Max. output Power 30 mW Max.Input Power 30 mW Operating voltage range 3.0V-4.2V Battery Lithium 3.7V, 100mAh Bluetooth-Version Bluetooth v4.0 Mic Sensitivity -42 ±3dB Operating range...
Page 5
Service and support For information: www.lenco.com Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.