Choose Your Connection; Connecting A Vcr; External A/V Source Setup; Connecting A Dvd Player - Haier HL32LE2 Owner's Manual

Hide thumbs Also See for HL32LE2:
Table of Contents

Advertisement

Choose Your Connection

There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to be displayed.
The following are examples of some different ways to
connect your TV with different input sources.

Connecting a VCR

To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
AV IN
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
A
Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
B
Insert a video tape into the VCR and press
the VCR. (Refer to the VCR owner's manual.)
C
Select the input source with using the
on the remote control, and then press
to select the source, press ENTER button to confirm.
Back of VCR
Video= yellow
Audio left= white
Audio right= red
Back of TV
PLAY on
INPUT button
6
5
/
button

External A/V Source Setup

How to connect
Connect the audio and video cables from the
external equipment's output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
Back of TV
AV IN
How to use
A
Select the input source using the
the remote control.
6
5
B
Press the
/
buttons to select the desired
source.
C
ENTER button to confirm.
Press the
D
Operate the corresponding external equipment.

Connecting a DVD player

How to connect
A
Connect the DVD video outputs (COMPONENT) to
the Y Pb Pr jacks on the TV and connect the DVD
audio outputs to the Y Pb Pr Audio IN jacks on the
TV, as shown in the figure.
B
Alternatively, you can connect the DVD player to
your TV using the audio and video jacks, similar to
connecting a VCR (refer to the previously shown VCR
figure).
Installation
Camcorder or video
game set
Video= yellow
Audio left= white
Audio right= red
INPUT button on
Haier LED HDTV
EN-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl37xle2Hl42xle2

Table of Contents