LENCO PDR-03 Instruction Manual page 8

4. General Operation
Enter the menu setting interface
1. Press and hold the INFO/MENU button,
*when the <Station scan> appears in DAB mode, or
*when the <Audio setting> appears in FM mode,
press or
2. Press ENTER button and then press
menu contents.
3. Select one content, press ENTER to enter the setting interface.
4. Press the INFO/MENU button to go back to the previous interface.
Backlight
At power on mode, backlight will be on for around 10 seconds and off.
For any button pressing or volume changing, backlight will be on and
corresponding function will be triggered at the same time when
applicable, then backlight will be off after around 10 seconds.
Factory Reset
To set the unit to original settings, enter the factory reset interface,
follow the tips (Press "ENTER" button), then the unit will restart.
SW Version
To check the software version of the system.
Store stations
It is possible to store up to 10 of your favorite stations. This will enable
you to access your favorite stations quickly & easily.
1. Listen to the station you would like to save.
2. Press the PRESET button. The screen displays:
3. Press or to select the desired preset number 1~10.
4. Press the PRESET button again to confirm.
Recall a stored station
Once you have saved the stations to the preset buttons, you can recall
by pressing the PRESET button. Then press
stations, and press ENTER to confirm.
button to find the <Main menu>.
/ button to cycle through the
or
5
Preset 1 empty
to select the stored