Nikon D70-series User Manual page 173

Commander Mode: Choose this option to use the built-in
fl ash as a master fl ash controlling one or more remote
optional Speedlights in up to two groups (A and B) using
Advanced Wireless Lighting.
Option
Built-in Choose fl ash mode for built-in fl ash (commander fl ash).
i-TTL mode. Menu of fl ash compensation values will be displayed; choose
TTL value between +3.0 and –3.0 EV in steps of / EV. At settings other than ±0,
will be displayed in control panel and viewfi nder.
Choose fl ash output level for built-in fl ash from values between Full Power
M and 1/128 Power (/ of full power).
fi nder.
Built-in fl ash does not fi re, but AF-assist illuminator lights. Built-in fl ash must
-- be raised to allow monitor prefl ashes to fi re.
fl ash-sync mode display.
Group A Choose fl ash mode for all fl ashes in group A.
i-TTL mode. Menu of fl ash compensation values will be displayed; choose
TTL
value between +3.0 and –3.0 EV in steps of / EV.
Auto aperture (not available with SB-600 and SB-R200 Speedlights). Menu of
AA fl ash compensation values will be displayed; choose value between +3.0 and
–3.0 EV in steps of / EV.
Choose fl ash output level for fl ashes in Group A from values between Full
M
Power and 1/128 Power (/ of full power).
-- Flashes in Group A do not fi re.
Group B Choose fl ash mode for all fl ashes in group B.
i-TTL mode. Menu of fl ash compensation values will be displayed; choose
TTL
value between +3.0 and –3.0 EV in steps of / EV.
Auto aperture (not available with optional SB-600 and SB-R200 Speedlights).
AA Menu of fl ash compensation values will be displayed; choose value between
+3.0 and –3.0 EV in steps of / EV.
Choose fl ash output level for fl ashes in Group B from values between Full
M
Power and 1/128 Power (/ of full power).
-- Flashes in Group B do not fi re.
Choose from channels 1–4. All Speedlights in both groups must be set to
Channel
same channel.
Flash Exposure Compensation
Flash exposure compensation (
Description
73) has no eff ect in Commander mode.
fl ashes in control panel and view-
is not displayed in control panel
163