Sony DSC-HX30 Instruction Manual page 24

Anti Blink
Movie SteadyShot
Position
Information
GPS Log REC
Register Setting
Send to
*2
Computer
In-Camera Guide
*1
DSC-HX20V/HX30V only
*2
DSC-HX30/HX30V only
Viewing
Slideshow
View on
Smartphone*
View on TV*
Send to Computer*
Send by
TransferJet
Delete
Retouch
Picture Effect
3D Viewing
View Mode
Display Cont.
Shooting Group
Protect
Print (DPOF)
GB
24
Set to automatically shoot two images and select image
in which the eyes are not blinking.
Set the strength of SteadyShot in movie mode. If you
change the setting for [Movie SteadyShot], the angle of
view will change.
Check the GPS triangulating status and update the
*1
position information.
*1
Record the route taken while carrying the camera.
Register the desired modes or camera settings.
Back up images by transferring them to a computer
connected to a network.
Search the camera's functions according to your needs.
Select a method of continuous playback.
Upload and transfer images to a smartphone.
View images on a network-enabled TV.
Back up images by transferring them to a computer
connected to a network.
Transfer data by closely aligning two products equipped
with TransferJet.
Delete an image.
Retouch an image using various effects.
Add various texture on images.
Set to play back images shot in 3D mode on a 3D TV.
Select the display format for images.
Select to display burst images in groups or display all
images during playback.
Protect the images.
Add a print order mark to a still image.