Nikon COOLPIX AW100 Reference Manual page 232

Troubleshooting
Problem
The saved images
are not displayed
in auto sort mode.
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
Pictures to be
printed are not
displayed.
Cannot select
paper size with
camera.
F18
Cause/Solution
• The desired image was sorted to a category other than
the category currently displayed.
• Images saved by cameras other than COOLPIX AW100
and images copied using the Copy option cannot be
displayed in auto sort mode.
• Images saved in the internal memory or on the memory
card may not be played back correctly if overwritten by a
computer.
• Up to 999 images and movies in total can be added to
each category. If the desired category already contains
999 images or movies in total, new images or movies
cannot be added.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm that the operating system used is compatible
with the camera.
• Computer is not set to launch Nikon Transfer 2
automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
• Memory card contains no pictures. Replace memory card.
• Remove memory card to print pictures from internal
memory.
Paper size cannot be selected from the camera in the
following situations, even for PictBridge compatible printers.
Use the printer to select paper size.
• The paper size selected using the camera is not
compatible with the printer.
• A printer that automatically sets the paper size is being
used.
A
70,
E12
E13
–
E13
23
22
73
–
74
77
20
21
E26,
E27
–