Vizio E480i-B2 User Manual page 10

It is recommended that two people take part in the base
installation.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft surface
such as a blanket.
To install the stand:
1. Align the base with the neck piece and tighten three (3) of the
included Phillips screws with a Phillips screwdriver as shown
2. Align the stand with the TV and slide it into place as shown.
Tighten the remaining four (4) Phillips screws into the back of
the TV as shown.
3. When you are finished, place the TV on a stable level surface.
E480i-B2: Place the TV on a stable level surface at least 4
inches from the floor.
4 4
1