D-Link DAP-1150 Quick Installation Manual page 5

Step 3: Begin Configuring your DAP-1150.
This configuration step presumes that you will use the DAP-1150's default
factory setting of operation mode of AP (access point). This mode allows
computers and devices equipped with 802.11g/n standard wireless LAN
interfaces to communicate with other wireless computers and devices
through the DAP-1150. In addition, the default factory setting provides no
wireless security. To set the DAP-1150 to another operation mode and to
set its wireless security, refer to its User's Manual.
Run a web browser on your computer.
The following login screen will appear:
In the Address field, type
the address of the DAP-
1150(192.168.0.50).
In the User Name field,
type in the default name
admin
Leave the Password
field blank.
Once you have logged in, the following Setup screen will appear:
Click Launch Wireless Setup Wizard
5