Connecting To A Tv; Connecting To A Tv Using A Digital Optical Cable - Samsung HW-J4000 User Manual

CONNECTIONS

CONNeCTING TO a TV

● Important: Before you begin, put the battery into the remote. See page 11 for instructions.

COnnECTIng TO A TV USIng A DIgITAL OPTICAL CABLE

1. Connect the OPTICAL In (audio) jack on the Soundbar to the OPTICaL OuT jack of the TV with a digital optical
cable.
2. Press the button on the top panel of the Soundbar or the SOURCE button on the remote control to select
the D.In mode.
+ Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set the auto Power function ON
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the button on the main unit's top panel or the SOURCE button on the remote control to select the
D.In mode.
3. Press the  button on the remote control for 5 seconds to turn auto Power Link on or off.
● auto Power Link is set to ON by default.
● Depending on the connected device, auto Power Link may not function.
● This function is only available in the D.IN mode.
Optical Cable
OPTICAL OUT
OPTICAL IN
DC 14V HDMI IN
AUX IN
HDMI OUT 5V 0.5A
OPTICAL IN (TV-ARC)
20