Changing The Wall Type (Wall Type); Adjusting The Initial Touch Sensitivity (Initial Touch); Specifying How The Pedal Part Will Be Sounded (Pedalbass Mode); Changing How Part 2 Will Be Sounded (Solo Mode) - Roland V-Combo VR-09 Owner's Manual

For details about how to make menu
settings, see p. 42.
Category Parameter
EFX Wall Type
Portamento
Initial Touch
Keyboard
PedalBass Mode
Solo Mode
Damper Assign
Controller
Damper Part
Value Explanation

Changing the Wall Type (Wall Type)

By changing the reverb type you can experience the feeling of performing in various diferent locations, and by changing the
wall type (the material of the walls) you can make further adjustments to the way in which reverberation occurs.
* When the Reverb Type is "SPRING, " the wall type you've speciied will be ignored.
DRAPERY Pleated curtains
CARPET Carpet
ACOUSTIC TILE Acoustic tile
WOOD Wood
BRICK Brick
PLASTER Plaster
CONCRETE BLOCK Concrete block
MARBLE Marble
You can apply portamento (an efect that makes the pitch change smoothly between one note and the next) to piano sounds
and synthesizer sounds.
For details, refer to "Making the Pitch Change Smoothly (Portamento)" (p. 25).
REFERENCE

Adjusting the Initial Touch Sensitivity (Initial Touch)

This adjusts the initial touch (the keyboard velocity sensitivity).
Initial Touch is of.
OFF
Volume remains constant regardless of how hard you play.
Initial Touch is on.
1–10 Striking the keys more forcefully will produce correspondingly louder sounds.
The change in volume when the keys are played forcefully increases as the value is increased.
Specifying How the Pedal Part Will Be Sounded (PedalBass
Mode)
You can specify whether the pedal part will sound only single notes at a time (MONOPHONIC) or will be able to play multiple
notes (POLYPHONIC).
MONOPHONIC, POLYPHONIC

Changing How Part 2 Will Be Sounded (Solo Mode)

You can change how part 2 will produce sound when Dual is selected.
* This does not afect organ sounds.
OFF All keys you play will produce sound.
ON Only the highest key you play will produce sound.

Changing the Function of the Pedal Switch (Damper Assign)

You can select the function that's assigned to the pedal switch connected to the DAMPER jack.
DAMPER Use as a damper pedal.
REGISTRATION SHIFT Switch consecutively through registrations.
LOOPER Control the looper function (p. 37).
ROTARY FAST/SLOW Switch the rotary speed between "FAST" and "SLOW. "
RHYTHM START/STOP Start/stop the rhythm pattern (p. 32).
SONG START/STOP
Same function as the [
Selecting the Part(s) Afected by the Damper Pedal (Damper
Part)
You can select the part(s) to which the damper pedal will apply.
to ALL The efect will be applied to the upper part and the lower part.
to LOWER The efect will be applied to the upper part.
to UPPER The efect will be applied to the lower part.
Detailed Settings for All Functions (Menu)
] (START/STOP) button.
45