Draytek vigor3900 User Manual page 350

general target
Apply
Cancel
4. Enter all the settings and click Apply.
5. A QoS rule profiler has been created.
Service Type - Choose one of the service types from the
drop down list.
If you want to create a new service type, simply click
open the following dialog.
Profile – type a new name for such service type.
Protocol –There are two options: TCP, UDP and
TCP/UDP. Select the protocol that you want to use.
Source Port Start /End - Type the start /end number for the
port range of the source port for such filter.
Destination Port Start / End - Type the start /end number
for the port range of the destination port for such filter.
Click it to save the configuration and exit the page.
Click it to exit the page without saving the configuration.
342
to
Vigor3900 Series User's Guide