Advertisement
INFINITY Micro Component Home Cinema System HCS-1
Troubleshooting
If there is no sound
wires are connected.
from any of the
Make sure none of the
speakers, check the
speaker wires are
following:
frayed, cut or puntured.
l
Receiver/amplifier is on
If the system plays at
and a source is playing.
low volumes but shuts
l
Powered subwoofer is
off as volume is
plugged in and is either
increased, check the
in the "On" or "Auto"
following:
position.
l
Check all wires and
l
Check all wires and
connections between
connections between
receiver/amplifier and
receiver/amplifier and
speakers. Make sure all
speakers. make sure all
wires are connected.
wires are connected.
Make sure none of the
Make sure none of the
speaker wires are
speaker wires are
frayed, cut or puntured.
frayed, cut or punctured.
l
If more than one pair of
l
Review proper
main speakers is being
operation of your
used, check the
receiver/amplifier.
minimum impedance
requirements of your
If there is no sound
receiver/amplifier.
coming from one
speaker, check the
If there is low bass
following:
output, check the
l
Check the "Balance"
following:
control on your
l
Make sure the
receiver/amplifier.
connections to the left
l
Check all wires and
and right "Speaker
connections between
Inputs" have the correct
receiver/amplifier and
polarity (+ and -).
speakers. Make sure all
l
Make sure that the
Infinity Systems continually strive to update and improve existing products, as well as create new ones. The
specifications and construction details in this and related publications are therefore subject to change without notice.
All rights reserved.
subwoofer is plugged
into an active electrical
outlet.
l
Powered subwoofer is
plugged in and is either
in the "On" or "Auto"
position.
If there is no sound
from the surround
speakers, check the
following:
l
Check all wires and
connections between
receiver/amplifier and
speakers. Make sure all
wires are connected.
Make sure none of the
speaker wires are
frayed, cut or puntured.
l
Review proper
operation of your
receiver/amplifier ant its
surround sound
features.
l
Make sure the movie or
TV show you are
watching is recorded in
Dolby surround. If it is
not, check to see if your
receiver/amplifier has
other surround modes
you may use.
INFINITY Micro Component Home Cinema System HCS-1
ALWAYS use INFINITY audio
connector cables for connection of
satellites to your AV-amplifier.
NEVER attempt to connect other
electrical devices, transformers, etc.
AUDIO INPUT ONLY
In doing so, damage will result.
Advertisement
