Setup Menu; Setting The Time Time; Auto Volume; Spdif Output - Samsung UN32J4000 Quick Start Manual

Multi-Track Sound
(analog channels only)
■ Mono: Choose for channels that are broadcasting in mono or if you
are having difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are broadcasting in stereo.
■ SAP: Choose to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎
Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions, the
volume may fluctuate each time channel is changed. This feature lets
you automatically adjust the volume of the desired channel by lowering
the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the back
of the TV to a digital audio in jack on a receiver or home theater.
■ Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output (SPDIF) format may differ
depending on the input source.
■ Audio Delay: Lets you correct timing mismatches between the audio
track and the video when you are watching the TV and listening to
digital audio output from the TV through an external device such as
an AV receiver. When you select Audio Delay, a slider appears. Use
the left and right arrow buttons to adjust the slider. Press ENTERE
when done (0ms ~ 250ms).

Speaker Select

If you are listening to the sound track of a broadcast or movie through an
external receiver, you may hear a sound echo caused by the difference in
decoding speed between the TV's speakers and the speakers attached
to your audio receiver. If this occurs, set the TV to External Speaker.
✎
When you set Speaker Select to External Speaker, the TV's
speakers are turned off. You will hear sound through the external
speakers only. When you set Speaker Select to TV Speaker
both the TV's speakers and the external speakers are on. You will
hear sound through both.
✎
When Speaker Select is set to External Speaker, the
and MUTE buttons will not operate and the sound settings will
be limited.
✎
If there is no video signal, both the TV's speakers and the external
speakers will be mute.
Visual Impaired
(digital channels only)
Adds verbal description to the main audio to help the visually impaired.
Dolby Digital Comp
Set Dolby Digital compression mode.

Sound Reset

■ Reset All: Resets all sound settings to the factory defaults.

Setup Menu

Language
Set the menu language.
✎
Choose between English, Español, and Français.
Setting the Time
Time
✎
The current time will appear every time you press the
■ Clock: Setting the clock is for using various timer features of the TV.
✎
If you disconnect the power cord, you have to set the clock again.
Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎
Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.
DST: (Daylight Saving Time) Switches the DST (Daylight Saving Time)
function on or off.
✎
DST and Time Zone function is only available when the Clock
Mode is set to Auto.
■ Sleep Timer t
Automatically shuts off the TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■ On Time / Off Time: Set the hour, minute, am/pm and Activate /
Inactivate. (To activate the timer with the setting you have chosen, set
to Activate.)
■ Volume: Set the desired volume level.
■ Contents: When the On Time is activated, you can turn on a specific
channel or play back contents such as photo or audio files.
TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
Antenna: Displays the current antenna source.
Channel: Select the desired channel.
VOLUME
Music/Photo: Select the folder containing MP3/JPEG files on the
USB device.
✎
The maximum displayed number of files, including sub folders, in
one folder of USB storage device is 2000.
✎
The media may not be playing smoothly when using the device
lower than USB 2.0.
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual to set at you convenience. If you select Manual, you can set
up the day you want to activate the timer.
Other Features

Game Mode

When connecting to a game console such as PlayStation™ or Xbox™,
you can enjoy a more realistic gaming experience by selecting the game
menu.
✎
Precautions and limitations for game mode
To disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
If you display the TV menu in Game Mode, the screen shakes
slightly.
Game Mode is not available when the input source is set to TV.
After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
- 8 -
INFO button.