Arming Your System In The "Stay" Mode; Using The Quick Arm (Optional - GE NetworX NX-1600E Series User Manual

ARMING YOUR SYSTEM IN THE "STAY" MODE

STAY is used when the user is inside the premise and wants protection around
the perimeter. Listed below are the steps to arm in the STAY Mode:
Step 1 Close all protected doors and windows.
• Ready light must be on or flashing when all protected zones and
sensors are secure. NOTE: If any zones are bypassed, a sensor
in that zone can be violated without affecting the ready light.
• The security system will not arm if the ready light is not on or
flashing.
• If the power light is off, you have no AC power. Restore power if
possible. If not, contact your installing company listed on page 1 of
this booklet for service.
• Enter your 4- or 6-digit user code.
Step 2
• If "Auto Bypass" is enabled, all interior zones will be bypassed if you
do not leave through a designated entry/exit door. If Auto Bypass is
enabled, omit Step 3.
• Press the STAY key.
Step 3
• The armed light will illuminate.
automatically, giving the user freedom of movement within the
interior area.)
• To toggle from a "delayed entry" mode to an "Instant" mode, press
Step 4
the STAY key again.
USING THE QUICK ARM (Optional, see page 1)
The Quick Arm feature may be used if it is enabled. Quick Arm will allow the user
to arm the security system in the AWAY mode by pressing the AWAY key, or
arm in the STAY mode by pressing the STAY key. This feature is used for
ARMING ONLY, and will not disarm the security system. This is ideal for a maid
or baby sitter code, etc.
CHANGING MODES WHILE SYSTEM IS ARMED
Press STAY to turn on/off (toggle) a delay on entry/exit doors.
(Optional) When armed, pressing BYPASS will turn on/off (toggle) all
designated interior zones.
(Optional) When armed, pressing AWAY will start the exit delay, enabling
you to leave the building.
An alarm will be created if your system is armed Instant and an entry/exit
door is opened.
leaving the premises.
NX-1600E LED Keypad
To restore an entry delay, press STAY again before
(All interior devices will bypass
7