Alfa Romeo 159 Training Material page 75

Hide thumbs Also See for 159:
Table of Contents

Advertisement

ENGINE
CONNECTION TO ECU
- connector pin 1 to ECU pin 30 side A (DC
electrical motor ground)
- connector pin 2 to ECU pin 9 side A (actuator
ground)
- connector pin 3 to ECU pin 24 side A (sensor
power)
- connector pin 4 to ECU pin 15 side A (DC
motor power)
- connector pin 5 to ECU pin 25 side A (IP2
signal from actuator to throttle)
- connector pin 6 to ECU pin 10 side A (IP1
signal from actuator to throttle)
CONNECTION ROUTE: The maximum slant of the wiring route with respect to the direction of the pins must not
exceed 45°. The wires fastened to the intake plenum must be shorter than 100 mm.
Traccia Didattica Alfa 159-en-ridotta
ALFA 159 TRAINING MATERIAL
CONNECTOR
6 pins, two rows
75/318
After Sales Training
DRAWING
NLP Failure position
UEA Home position
OEA Maximum opening position
© 2004 Fiat Auto S.p.A. - All rights reserved
Fiat Auto S.p.A.

Advertisement

Table of Contents
loading

Table of Contents