Additional Information; Antenna Information - Sony SLV-N700 Operating Instructions Manual

Additional Information
Antenna information
Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the
VCR.
1
Loosen the screws on the antenna connector.
3 Wind the twin leads around the screws on the antenna connector.
i
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna
to the VCR.
300-ohm twin
75ohm coaxial
cable
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
UHFNHF
band
separator/
mixer (not
supplied)
56
Antenna information