Operating When On The Move; Operation; Remote Operation; Activating Remote Access - Gigaset C285 Manual

Toll-Saver Mode – Call acceptance/
charge saving function for remote

operation

For each line, you can set when you want the
answering machine to respond to calls.
The options are: 2 Rings, 4 Rings, 6 Rings,
8 Rings, as well as the cost-saving setting
Toll Saver.
Note:
The number of rings refers to the ring tones of
the base station. If you have selected another
ring tone, the number of rings you hear may dif-
fer from the selected number of rings.
When Toll Saver is set, the following deter-
mines when the answering machine accepts
calls:
u
If no new messages are present, the
answering machine accepts calls after 4
Rings.
u
If new messages are present, the answer-
ing machine accepts calls after 2 Rings.
When operating remotely, you know there
are no new messages when you hear the
third ring (otherwise the answering machine
would have already accepted your call).
There will be no call charges if you hang up
now.
¢
§Menu§
Answer Machine
¢ ¢
Ring Delay Line 1 / Line 2
2 Rings / 4 Rings / 6 Rings / 8 Rings / Toll
Saver
Select an option and press
Changing the language of voice
prompts and prerecorded
announcements
You can select English, Spanish, or French as
the language of voice prompts and prere-
corded announcements. You can select dif-
ferent languages for line 1 and line 2.
¢
§Menu§
Answer Machine
¢
Voice Language
Italian / Français / English
Select a language and press
¢
Settings
§OK§
¢
Settings
¢
Line 1 / Line 2

Operating when on the move

(remote operation)

You can check or activate the answering
machine from any other telephone (hotel,
pay phone, etc.).
Requirements:
u
The phone you are using for remote oper-
ation must have tone dialing (DTMF), so
that you hear different tones when you
press the keys.
u
You must activate Remote Access.

Activating Remote Access

¢
§Menu§
Answer Machine
¢
Remote Access
On / Off
Calling the answering machine and
playing back messages
~
; ~
You will be informed whether any new mes-
sages have been recorded. The messages are
then played back. You can now operate the
.
answering machine using the keypad.
§OK§
.
¢
Settings
§OK§
Select and press
your selection.
Dial your own number.
While listening to your
announcement, press the ;
key and enter the system PIN
(default setting: 0000,
see page 33).
to confirm
25