Getting To Know The Switch; Introduction; Key Features; The Front Panel - Sapido HG-3216 User Manual

1

Getting to know the Switch

1.1 Introduction

The Gigabit Ethernet Switch is equipped with 16 Gigabit copper ports and each port
provides a max speed of 2000Mbps and a Full-Duplex, Collision Free Bandwidth. It's a
multi-speed, versatile network device that combines Gigabit, Fast Ethernet, and
Ethernet ports in a single device. This device meets RoHS compliance. It is
power-saving with Green Ethernet technology.

1.2 Key Features

．Supports Auto-Negotiation on each TP port
．Supports 9216byte maximum packet length
．Supports Green Ethernet
．Link-On and Cable Length Power Saving
．Link-Down Power Saving
．IEEE 802.3az Energy Efficient Ethernet (EEE) supported
．Provides Store-and-Forward switching scheme
．Supports Auto-MDI/MDI-X function
．Supports IEEE 802.3x Flow-Control for Full-Duplex operation
．Back-Pressure function supports for Half-Duplex operation
．Non-Blocking Performance Improves Access to Network Resources
．8K-entry lookup MAC address table

1.3 The Front Panel

1.3.1

Network Ports

The Switch is equipped with eight RJ-45 ports that support network speeds of
10/100/1000Mbps.
1.3.2

Cabling

1000Mbps - To transmit at 1000Mbps requires Cat.5 TP cabling that has all Four (4)
twisted-pair wires connected in RJ45 connector.
100Mbps - To transmit at 100Mbps requires Cat. 5 cabling.
10Mbps - When transmitting at 10Mbps, Cat. 3, 4 or 5 TP cabling with RJ-45 sockets
can be used.
http://www.sapido.com.tw
5
USER MANUAL V1.0