Terminal Connections - Toa NX-100 User Manual

9. TERMINAL CONNECTIONS

To mixer, amplifier, etc.
When the connected unit has an unbalanced input, make the connections
as follows:
Connected Unit
This figure represents the NX-100.
DC INPUT
24V 200mA
FG
• Network Connections
The NX-100/100S automatically distinguishes between 10BASE-T and 100BASE-TX networks, and
establishes a connection. For this connection, use a "straight" UTP Category 5 LAN (Ethernet) cable
fitted with an RJ-45 connector.
Tip
It is recommended that the unit be connected to network equipment capable of performing full-duplex
communications.
Note
Refer to p. 10, CONNECTIONS TO TERMINAL
8
• Audio Output Terminal Connections
Connect the mixer, amplifier, etc. using 2-core
shielded cable.
H
E
Shield
AC ADAPTER
DC INPUT
24V 200mA 10/100M RS-232C
Hot (H)
Cold (C) NX-100/100S
Earth (E)
Shield
CONTACT OUTPUT 1 2 3 4 5
CONTACT INPUT 1 2 3 4 5
To microphone or
other sound sources
• Audio Input Terminal Connections
Connect the microphone or other sound
sources using 2-core shielded cable.
PLUGS, for audio terminal connection procedures.
6 7 8 C H C E H C E AUDIO OUTPUT
INPUT
VOLUME
6 7 8 C H C E H C E AUDIO INPUT
LINE MIC