Stand-Alone Mode; Add A Card; Adding A Card By Reading It - Siemens RF30-EM Configuration Manual

11

Stand-alone mode

11.1

Add a card

11.1.1 Adding a card by reading it

Siemens AG
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
1. Press B .

2. Enter the 6-digit Administrator code. See section 8 Change Administrator
code.

3. Press A01 .
 The buzzer sounds a confirm tune.

- or -
 If the memory is full, the buzzer will sound an error tune and return to
Administrator mode.

4. Present the card at the RF30-EM.
 The buzzer sounds a confirm tune.

5. Add the next card, if required.
Stand-alone mode
21
04.2010