Network Deployment - Vivotek SD7313 Quick Installation Manual

4

Network Deployment

1. If you have external devices such as
sensors and alarms, connect them to
the general I/O terminal block.
G N D : Ground
D I 4 : Digital Input
D I 3 : Digital Input
D I 2 : Digital Input
D I 1 : Digital Input
G N D : Ground
N . O . : RELAY_NO
COM. : RELAY_COM
+ 1 2 V : Power, 12V DC
2. Use the supplied RJ45 female/female
coupler to connect the Network Camera
to a switch.
Use Category 5 Cross Cable when
Network Camera is directly connected
to PC.
(AC 24V 2A)
3. Connect the power cable from the
Network Camera to a power outlet.
EN-5