Setting Menu Items - Panasonic DMC-FX35 Operating Instructions Manual

DMC-FX35EB_mst.book 18 ページ ２００８年１月２８日 月曜日 午前１１時２１分
Preparation
•
This menu lets you perform the clock settings, select the operating
beep tone settings and set other settings which make it easier for you to
operate the camera.
• The [SETUP] menu can be set from either the [REC MODE] or
[PLAYBACK MODE].
∫ Functions that cannot be set or will not work under some conditions
Due to the camera's specifications, it may not be possible to set some of the functions or
some functions may not work in some of the conditions under which the camera is used.
For details, refer to P105.
This section describes how to select the normal picture mode settings, and the same
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
1
Turn the camera on.
A [MENU/SET] button
B [REC]/[PLAYBACK] selector switch
C Mode dial
2
Slide the [REC]/[PLAYBACK] selector
switch to [!].
•
When selecting the [PLAYBACK] mode menu
settings, set the [REC]/[PLAYBACK] selector switch to
[(], and proceed to step
3
Set the mode dial to [·].
4
Press [MENU/SET] to display the menu.
•
You can switch menu screens from any menu item by
rotating the zoom lever.
18
VQT1P21
[SETUP] menu (P20 to 24)

Setting menu items

Ø ] to [ š ] in the normal picture mode
.
4
OFF ON
C
B
A
MENU
/SET