New Holland 456 Specifications

New Holland
Sicklebar Mower Specifications
451 456
MODEL
CUTTERBAR LENGTH
OVERALL LENGTH
OVERALL WIDTH
HEIGHT
WEIGHT, APPROXIMATE
MOWER DRIVE
KNIVES
CUTTERBAR OPERATING RANGE
TRACTOR REQUIREMENT
The mounted 451 has an exclusive telescoping
yoke that uses tractor power to lift the mower.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLN (866-639-4563).
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
451
seven-foot nine-foot
Straight-line motion of the drive head provides fast,
smooth cutting combined with less wear on the
knife assembly and hold-down clips.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator's Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
456
Page 1 of 1