Playing Discs - Sony DVP-NS300 Service Manual

QQ
3 7 63 1515 0
Audio Cord Connection Type
B-2 C-2
D
qa Press ENTER.
DTS is selected.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
A D
Audio Cord Connection Type
B-2 C-2
A D
qd Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 54).
Enjoying the surround sound effe cts
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23
( through ). Each of these are the default settings and do not need to be adjusted when
B A D
you first connect the player. Refer to page 56 for using the Setup Display.
TE
L 13942296513
26

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
POWER
Power indicator H A x
[/1
AUDIO
H
x
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
www
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
.
28
http://www.xiaoyu163.com
You select Page
D-PCM 59
DOLBY DIGITAL (only if the 59
amplifier/receiver has a Dolby
Digital decoder)
OFF
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
OFF
ON
B
You select Page
OFF 59
ON (only if the amplifier/receiver 59
has a DTS decoder)
4
Press A on the player, and place a
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
With the playback side facing down
5
Press H.
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 31), VIDEO CD (page
32).
To turn on the player
Press the POWER switch on the player. The
player enters standby mode and the power
indicator lights up in red. Press [/1 on the
remote. The player turns on and the power
indicator lights up in green. In standby mode,
the player also turns on by pressing A on the
player or by pressing H.
To turn off the player
Press [/1 on the remote. The player enters
standby mode and the power indicator lights
x ao
up in red. To turn off the player completely,
y
press POWER on the player. While playing
a disc, do no turn off the player by pressing
i
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press x to stop playback and then press [/1
on the remote
http://www.xiaoyu163.com
8
Audio Connection (page 19 to 23)
A
No additional settings are needed.
B-1
C-1
Item Yo u select
DOWNMIX DOLBY SURROUND
• If the sound distorts even when the volume is turned down, set "AUDIO ATT " to "ON" (page 58).
B-2 C-2 D
Item Yo u select
DOWNMIX DOLBY SURROUND
DIGITAL OUT ON
Q Q
3 6 7 1 3
Notes on playing DTS sound tracks on
a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jacks of the
player.
• Set the sound to "STEREO" using the
AUDIO button when you play DTS sound
tracks on a CD (page 42).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL and
COAXIAL) jacks even if "DTS" in
"AUDIO SETUP" is set to "OFF" in the
Setup Display (page 60), and may affect
your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS
sound track
• DTS audio signals are output only through
the DIGITAL OUT (OPTICAL and
COAXIAL) jacks.
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 59). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
• When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
u163
SETUP" (page 59).
.
1-6
2 9 9 4 2 8
Page
58
Page
58
5 9
1 5 0 5 8 2 9 9 4
Additional operations
Z
. />
INSTANT
H
REPLAY
X x
To Operation
Press x
Stop
Pause Press X
Press X or H
Resume play after
pause
Press >
Go to the next chapter,
track or scene in
continuous play mode
Press .
Go back to the
preceding chapter,
track or scene in
continuous play mode
Press Z
Stop play and remove
the disc
Replay a previous Press INSTANT
scene (DVD only) REPLAY
z
The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
Note
You may not be able to use the Instant Replay function
with some scenes.
m
co
9 9
2 8 9 9
27
29