Setting The Left/Right Volume Distribution (Balance); Adjusting The Front/Rear Volume Distribution (Fader); Preamplifi Er Output (Preamp-Out/Sub-Out); Adjusting The Sub-Out Level - Blaupunkt Bahamas MP46 Operating And Installation Instructions

Sound
u or button : repeatedly
Press the
until the desired centre frequency
appears on the display.
u
Press the or
the level between ±7.
u Press the AUDIO button 5 twice to
exit the menu.
Setting the left/right volume
distribution (Balance)
To adjust the left/right volume distribution
(Balance),
u Press the AUDIO button 5.
"BASS" appears on the display.
or button : repeatedly
u
Press the
until "BAL" appears on the display with
the current setting.
u
Press the or
the balance (right/left).
u Press the AUDIO button 5 to exit the
menu.
Adjusting the front/rear volume
distribution (Fader)
To adjust the front/rear volume distribution
(Fader),
u Press the AUDIO button 5.
"BASS" appears on the display.
u or button : repeatedly
Press the
until "Fader" appears on the display
with the current setting.
u
Press the or
the volume distribution front/rear.
Press the AUDIO button 5 to exit the
u
menu.
button : to adjust
button : to adjust
button : to adjust
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic
lowpass fi lter of the device (level and cutoff
frequency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.

Adjusting the sub-out level

The sub-out level can be adjusted in 8
increments (0 to +7).
Press the AUDIO button 5.
u
"BASS" appears on the display.
u or button : repeatedly
Press the
until "SUBOUT" appears on the
display.
u
Press the or
value between 0 and +7.
When you have fi nished making your
changes,
u Press the AUDIO button 5 twice.
Adjusting the sub-out cutoff
frequency
You can select 1 of 4 settings: 0 Hz, 80 Hz,
120 Hz and 160 Hz.
u Press the AUDIO button 5.
"BASS" appears on the display.
Preamplifi er output
button : to adjust a
27