Table of Contents
Advertisement
Available languages
Available languages
through a DHCP server or a fixed IP address that must be in the same subnet of
the Wireless Broadband Router. The default IP address of the Wireless Broadband
Router is 192.168.1.1 and subnet mask is 255.255.255.0. The best and easy way is
to configure the PC to get an IP address from the Wireless Broadband Router
(DHCP client).
Please follow the steps below for PC's network environment installation. First of all,
please check your PC's network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
Before you configure this Wireless Broadband Router, you need to know the
following default settings:
•
Username:admin
•
Password:admin
•
IP LAN address: (192.168.1.1), Subnet Mask (255.255.255.0)
•
IP WAN address:dhcp client
•
DHCP Server: enable (192.168.1.100-192.168.1.199)
•
SSSID= default, Channel=6, WEP/WAP=disable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the Connections tab and select one
of the following options:
•
Never use remote connection
•
Use remote connection if another network connection isn't available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1.
Go to Start / Settings / Control Panel. In the Control Panel, double-click on
Network and choose the Configuration tab.
2.
Select TCP / IP -> NIC Compatible, or the name of any Network Interface
Card (NIC) in your PC.
3.
Click Properties.
4.
Select the IP Address tab. In this page, click the Obtain an IP address
automatically radio button.
5.
Then select the DNS Configuration tab.
A02-WS2
ENGLISH
Advertisement
Table of Contents
