False Color Mode - Panasonic VARICAM LT Operating Manual

f The display mode can be set in [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [EXPAND MODE]/[- POS1]/[- VALUE1]/[- POS2]/
[- VALUE2].
@ NOTE
t The output video from the <VF SDI> terminal is enlarged.
t The output from the <SDI OUT 1> terminal is not enlarged.
t The output from the <SDI OUT 2> terminal will be the same display as the output from the <VF SDI> terminal when [VF SDI] is selected in [MENU] →
[OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 2 SIGNAL SEL].
Focus in color
Peaking display (focus in red)
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS IN COLOR SW] to [ON].
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL] to [RED].
Adjust the focus so that the contours of the subject you want to focus on turn red.
[GREEN] or [WHITE] can also be selected in [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL].
The region that is colored is changed by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- PEAKING VALUE].
The video in background can be changed to monochrome by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- MONO].
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.
Focus square display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS SQUARES SW] to [ON].
Adjust the focus so that the square size displayed in the area of the subject to be focused becomes the largest.
When focused on the doll
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.
Monochrome display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [MONO SW] to [ON].
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.

False color mode

Check the exposure using the false color.
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FALSE COLOR SW] to [ON].
Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.
The false color can be displayed through output from the <VF SDI> terminal.
Display patterns
r When [MAIN COLOR] is [V-Log]
Color
(Red)
(Yellow)
(Pink)
Chapter 7 Viewfinder — Convenient shooting functions
Level
(White clip −3%) or more*
(White clip −6%) to (White clip −3%)*
48.7% - 51.8%
– 89 –
When focused on the panel
Description
White-level clip
Lower area of the white-level clip
One-stopover color from neutral gray