Safety Controls - Cornelius WCC 2001 QT-R Service Manual

Continuous Flow ICemaker Service Manual
S C
AFETY ONTROLS
Your icemaker unit has several safety and control devices incorporated into its design.
!
WARNING:
None of the below described devices should ever be "bypassed" to allow the unit to function.
The safety and control system shut–off devices are:
1. Low water shut off reed switch located in icemaker float assembly. (Automatic reset type.)
2. Gearmotor thermal overload, manual reset type (red button on motor).
3. Compressor thermal overload, automatic reset type.
4. Anti–freeze relay and associated circuit. See wiring diagrams.
5. Main service switch located on top of the control box.
6. Bin Control.
7. High pressure cut out (water cooled only).
Figure 13. Refrigeration schematic
© 2005-2014, Cornelius Inc. - 16 - Publication Number: 630460308SER