Connecting your System to the Power Supply
☛
Before plugging your system into a main socket, you must check the
voltage.
1
Check the position of the voltage selector on the rear of the system
(OPTIONAL).
2
Plug the main lead (marked AC Cord on the rear of the system) into an
appropriate socket.
3
Press the POWER (
) button to turn your mini-compact system on.
Inserting Remote Control Batteries
insert or replace remote control batteries when you:
Purchase the mini-compact system
◆
Find that the remote control is no longer operating correctly
◆
☛
When replacing the batteries, use a new set of batteries and never mix
alkaline and manganese batteries.
1
Place your thumb on the position marked
(rear of the remote control) and pull the cover in the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect the
polarities:
+ on the battery on
in the battery compartment
◆
– on the battery on
in the battery compartment
◆
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time, remove
◆
the batteries to prevent corrosion.
The remote control can be used up to approximately 7 meters in a
◆
straight line. It can also be operated at a horizontal angle of up to
30° from the remote control sensor.
+ on the battery compartment cover
Connecting the Speakers
the speakers connector terminals are located on the rear of the system.
Left speaker (marked L)
◆
Right speaker (marked R)
◆
1
To achieve the correct sound quality, connect those speaker connector cables to
the speaker connector terminals of the system.
MX-D830
Front
Speaker (R)
MX-D850
Front
Speaker (L)
MX-D870
Front
Speaker (L)
Front
Speaker (R)
2
Connect the LED cables of the Front Speakers to each LED Terminals
of the system.
You can enjoy the special light effect on your speakers.
◆
Front
Speaker
Front
Speaker (L)
SUBWOOFER
Front
Speaker (R)
Subwoofer
Rear
Speaker (L)
Rear
Speaker (R)
Subwoofer
Front
Speaker
7
ENG