Samsung WA45K7100A series User Manual page 56

Troubleshooting
No Code
11
12
13
14 PC1
15
16
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
56 English
WA7700K_WA45K-03520S-00_EN.indd 56
Check the drain hose.
• Make sure the end of the drain hose is placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
LC
centre.
NOTE
When the washer displays "LC", the washer do draining for 3
minutes. During this time, the Power button is inoperative.
Water is overflowed.
• Restart after spinning.
OC
• If the information code remains on the display, contact a local
Samsung service centre.
When position of the clutch can't be detected.
PC • If the information code remains, contact a customer service
centre.
After position of the clutch is detected, if the signal of the clutch
hall goes wrong.
• If the information code remains, contact a customer service
centre.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
Ub • Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin result
might be unsatisfactory, and an "Ub" check message will be
shown in the display.
Display for additional rinsing.
• Show additional rinsing in sensing unbalance.
Ur
• Method of releasing the display.
- Any key input.
Meaning
2015/12/16 19:08:35