Page 16
4. Check that the network cable is connected to the AXIS P1311/P1343/P1344 and then start/
restart the camera, by disconnecting and reconnecting power. If PoE is used, start/restart the
camera by disconnecting and then reconnecting the network cable.
5. Close the command prompt when you see 'Reply from 192.168.0.125:...' or similar.
6. In your browser, type in http://<IP address> in the Location/Address field and press Enter on
your keyboard.
Notes:
To open a command prompt in Windows: from the Start menu, select Run... and type cmd. Click OK.
•
To use the ARP command in Windows Vista, right-click the command prompt icon and select Run as
•
administrator.
To use the ARP command on a Mac OS X, use the Terminal utility in Application > Utilities.
•
AXIS P13 Series Installation Guide