Remote Control Buttons - Haier HT-2599 Service Manual

Remote control buttons

Before using the remote control, press the main power switch to turn on the TV set.
① TV/AV alternating: press this button to change from
TV to AV 1 and to S-AV 2.
② Picture memory mode: each press of this button will
have a result as shown in Fig. 11 (see figure 11).
③ Direct program selecting: one-digit number(0-9);
two-digit number(10-99).
④ Display menu: press the button to display Program
Memory → Picture Quality Selection →Chinese/English
Selection in cycle.
⑤ Display picture mode: press the button to select
color, brightness, contrast, picture quality,
background.
⑥ Menu adjustment: move up or down to adjust the
item functions.
⑦ TV system adjustment: press the button for display
on the screen (as shown in figure 12).
⑧ Mute: press the button to stop sound for a short
time, press again to resume the sound.
⑨ Timed switch off: press the button to adjust the time
for timed switch off, with the display changing in the
following order: →120 min. →110 min. →100
min...→20 min. →10 min. →OFF. once set, the TV set
will automatically shut off at the set time.
⑩ Volume adjustment:
+ press the button to increase volume;
− press the b
utton to decrease volume.
(11) Program adjustment:
+ press the button to increase position number.
− press the button to decrease position number.
(12) Menu selection: press up or down to select menu
functions.
(13) One/two digit position number alternating: press the
button to select one or two digit position number.
(14) Display position number: press the button and the
number of the current program will be displayed on the
screen. Press again and the position number will
disappear.
(15) Remote switch ON and OFF: press the button to
turn off the DC power supply of the TV set. To turn on
the TV set, press again this button or a digit button.
Note: In case of a power failure while watching the TV
or the TV set is not used for a long period of time (in
standby status for over 12 hours), the main power switch
shall be turned off.
and blue
→MEMORY 1→ MEMORY 2 →
↑
←MEMORY 4← MEMORY 3
MODE
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
TIME SELECTING
↑
↓
11
Figure 10
↵
PICTURE QUALITY
DYNAMIC Bright and Dynamic effect
STANDARD Standard Picture
SOFT Soft Picture
SETTING User Set Up Picture Quanlity
Figure 11
Press ← or →button
COLOR AUTO→PAL→SECAM
↑
3.58NTSC←4.43NTSC
BG ⇔ DK
SOUND
Figure 12
↵