Yamaha Portable Grand DGX-205 Owner's Manual page 64

Reference
Category
PC MODE
MIDI
METRONOME
LESSON
UTILITY
* All these settings can be conveniently reset to their initial default values by pressing the [+] and [-] buttons simultaneously.
(The exception to this is Initial Setup Send and Bulk Send, which is an operation, not a setting.)
64
DGX-205/203, PSR-295/293 Owner's Manual
Downloaded from www.Manualslib.com
Function settings
Setting
PC
PC mode
Local
Local On/Off
xtClock
E
External Clock
KbdOut
Keyboard Out
tyleOut
S
Style Out
SongOut
Song Out
InitSend
Initial Setup Send
BulkSend
Bulk Send
TimeSig
Time Signature
MtrVol
Metronome Volume
R-Part
Lesson Track (R)
L-Part
Lesson Track (L)
Grade
Grade
D-Cancel
Demo Cancel
manuals search engine
Item title Range/Settings
mode
PC1/PC2/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
YES/NO
YES/NO
00 – 15
000 – 127
GuideTrack 1 – 16
GuideTrack 1 – 16
ON/OFF
ON/OFF
Description
Optimizes the MIDI settings when you connect to a
computer (page 67).
PC1 sets local off and external clock on for use
with an external sequencer or similar device.
The PC2 setting allows the instrument to use Digi-
tal Music Notebook content on the connected
computer.
OFF turns local control on, external clock off, key-
board out on, style out on, and song out on.
Determines whether the instrument's keyboard con-
trols the internal tone generator (ON) or not (OFF).
(page 66)
Determines whether the instrument synchronizes to
the internal clock (OFF) or an external clock (ON).
(page 66)
Determines whether keyboard performance data of
the instrument is transmitted (ON) or not (OFF).
Determines whether Style data is transmitted (ON)
via USB or not (OFF) during Style playback.
Determines whether Song data is transmitted (ON)
via USB or not (OFF) during Song playback.
Lets you send the data of the panel settings to a com-
puter. Press [+] to send, or press [-] to cancel. Use
the [+] button to transmit the data. Use the [-] button
to stop the transmission.
User song and registration memory data can be
transmitted as bulk data to sequence software run-
ning on your computer, where it can be stored for
later retrieval and use. The instrument must be con-
nected to a computer on which the appropriate USB
MIDI driver is installed. With Bulk Send showing on
the instrument's display, press [+] to begin bulk data
transmission. Press [-] to cancel the transmission.
Refer to page 67 for information on connecting the
instrument to a computer, and to page 71 for informa-
tion on installing the USB MIDI driver.
Determines the time signature of the Metronome.
Determines the volume of the Metronome.
Determines the guide track number for your right
hand lesson. The setting is only effective for songs in
SMF format 0 transferred from a computer.
Determines the guide track number for your left hand
lesson. The setting is only effective for songs in SMF
format 0 transferred from a computer.
Determines whether the Grade function is on or off.
Determines whether Demo cancel is enabled or not.
When this is set to ON, the Demo Song will not play,
even if the [DEMO] button is pressed.