How To Insert The Batteries - Panasonic CS-ME 7CKPGCS-ME10CKPG Operating Instructions Manual

HOW TO INSERT THE BATTERIES

2 units of AAA
alkaline batteries
Insert from the
side way.
Back cover
HOW TO SYNCHRONIES TO THE LOCAL TIME
REPLACEMENT PERIOD
The standard replacement period is 1 year.
Whenever there is weak signal reception or weak display on the remote control.
PLEASE COMPLY
As the cause of breakdowns and injuries is normally due
to electrolyte leakage, heat up or breakages, please
comply with the following recommendations:
Always replace both the alkaline batteries at the same
time. (Manganese batteries have shorter life spans)
Avoid using rechargeable (Ni-Cd types) batteries. (Due
to differences in dimensions, shapes and operating
properties)
Remove both the batteries if the remote control is not
to be used for a long period.
Remote control preparations
1
2
1
2
3
Replacing the batteries
Remove the back cover.
Check whether the display
Insert the
batteries and
blinking.
close the back
cover.
If there is no display, recheck and
(
adjust the position of the batteries.
Synchronize to the local time.
Press the
clock button
(Example) 2.30 pm will be:
Use the up-
down arrow
buttons to
Fast advance by pressing the button
adjust the
continuously.
At midnight 12.00 o'clock, the display will
time
show:
Press the
clock button
NOTE
You may replace the batteries before the
recommended replacement due date.
The supplied batteries are for your initial
operation use, hence you may need to replace
them earlier than the standard 1 year period.
on the remote control is
Blinking
)
Blinking
Blinking
Lighted
[Not
blinking]
9