Using The Channel Settings; Setting The Area; Tuning Broadcast Signals Manually - Samsung UA48JU6000RXXP E-Manual

Using the Channel Settings

Setting the Area

MENU
(MENU/123)
When you enter your PIN number, you can select your country so that the TV can correctly auto-tune
the broadcasting channels.
"
This function is not available in all geographical areas.
"
The list of countries (areas) displayed on the TV's screen may differ with the geographical area.

Tuning broadcast signals manually

MENU
(MENU/123)
You can scan for all the channels manually and store the scanned channels in the TV. To stop
scanning, select Stop.
"
This function is not available on certain models in specific geographical areas.
Tuning analogue channels
MENU
(MENU/123)
Tuning
New and configure Programme,
Select
for analogue channels. Then, select
"
This function is only available for analogue broadcasts.
Channel mode
P
●
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
C
●
(aerial channel mode) /
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Broadcasting Channel Settings
Broadcasting Channel Settings
Broadcasting Channel Settings
Colour
Store
to store the scanned channels in the TV.
S
(cable channel mode)
Area
Manual Tuning
Manual Tuning
System, Sound System, Channel, and
Try Now
Analogue Channel
Search
to scan