D-Link dge-560t Ethernet Adapter page 10

Included on the CD-ROM is a "Virtual Cable Tester for D-Link DGE-560T". It
will help you to detect potential cabling issues such as cable opens, cable
shorts, and impedance mismatches.
1. Insert the CD-ROM that came with your D-Link DGE-560T Gigabit PCI Express
Ethernet Adapter into your CD-ROM drive.
2. Choose Drivers > Virtual Cable Tester and click "Install the package".
3. Follow the instructions provided by the installation wizard.
4. Go to Start > Programs > Marvell > Virtual Cable Tester to start the program.
5. Select the network adapter you want to test and click "Run".
The cable, which is to be tested, consists of four pairs of wire. Each pair is tested
and the result is displayed next to the corresponding pair. The field "Distance"
displays the distance to the fault. The field "Status" displays the states of the
cable pairs:
• "No Info" – The test has not yet been performed or no info is available.
• "Normal Cable" – The cable pair is connected correctly.
• "Short Cable" – Two or more cable pairs are short-circuited together.
- 8 -