4.
Installation of sanitary water tank
4.1
Accessories of water tank
4.2 Selecting an installation location
Enough space is installation and maintenance shall be preserved.
The bearing surface should be flat able to bear weight of the unit.
No flammable gas is leaked nearby.
It is convenient for piping and wiring.
If the unit need to be installed on a metal holder, make sure they are insulated well and in
accordance with local standard.
Installing the equipment in any of the following places may lead to malfunction of the
equipment (if it is inevitable, consult the supplier).
The site contains mineral oils such as cutting lubricant.
Seaside where the air contains much salt.
Hot spring area where corrosive gases exist, e.g., sulfide gas.
Factories where the power voltage fluctuates seriously.
Place like kitchen where oil permeates.
Place where strong electromagnetic waves exist.
Place where flammable gases or materials exist.
Place where acid or alkali gases evaporate.
Other special environments.
Precautions before installation
Decide the correct way of conveying the equipment.
If the unit has to be installed on a metal part of the building, electric insulation must be
installed, and the installation must meet the relevant technical standards for electric
devices.