Mitsubishi Electric WD-60C10 Service Manual page 40

Dlp projection hdtv

Hide thumbs Also See for WD-60C10:

Table of Contents

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /

WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838

Repeat the process of pressing (V43C & V43

play the 15 different preset amounts of correction to the Top-Center Red Line. When you find the pattern

with the straightest line, press <VIDEO> to proceed to the Center Red Line. Repeat the process for the Cen-

ter Line, followed by the Bottom Line. Press <ENTER> then <EXIT> to exit and save the 4:3 and 16:9 data.

Select the Geometry Test Pattern (See HVPOS). If Geometry is acceptable, press <EXIT> to quit.

Select Straightest Red Line (Top-Center)

Select Straightest Red Line (Center)

Select Straightest Red Line (Bottom)

<CH > or <CH >)

(V43+ & V43++ <> or <>) to dis-

4:3 MODE

Page 40

Table of Contents

Show Quick Links

Table of Contents

Wd-65c10 Wd-73c10 Wd-60638 Wd-60638ca Wd-65638 Wd-65638ca ... Show all