6) Next a status screen will display as shown in Figure 6. DO NOT POWER OFF OR PRESS ANY KEY ON THE
REMOTE CONTROL UNTIL AFTER COMPLETION OF THE UPDATE!!! DO NOT REMOVE USB FLASH
DRIVE UNTIL INSTRUCTED!!!
7) Once the firmware update is complete the TV will display the message shown in Figure 7 below. The TV will
then go to Standby or reboot according to the user setting selected in Step 4.
8) Remove the USB Flash Drive from the TV.
9) The firmware update procedure is now complete.
2013 Toshiba America Information Systems Inc.
TOSHIBA AMERICA INFORMATION SYSTEMS INC
http://support.toshiba.com
Figure 6
Figure 7
9740 Irvine Blvd.
Irvine, CA. 92618
Firmware Update 2014
4