Ce Declaration Of Conformity; Déclaration De Conformité Ce - NETGEAR WG602 User Manual

Netgear 54 mbps wireless access point user's guide wg602
Hide thumbs Also See for WG602:
Table of Contents

Advertisement

Problem
Cause
The Ethernet light
The power light is
doesn't light up.
lit, the Ethernet
network cable is
attached to the
Ethernet port, but
the Ethernet light
isn't lit. There is a
possible hardware
connection
problem.
I cannot get onto
You may not have
the Ethernet
configured the
network from the
wireless
wireless network.
parameters of the
computers with
wireless adapters
to be the same as
the access point.
23
Solution
The other side of the Ethernet cable is not
connected to a hub or switch, or the hub or
switch is not powered on. Make sure the cables
are inserted all the way – you should hear a click.
The Ethernet cable is bad. Replace it with the one
that came with the access point.
You have the wrong cable between the router and
the modem. Use the standard straight through or
the cable that came with the access point.
Check the wireless configuration of the wireless
adapters and access point through its Web-based
interface from a computer connected to the
Ethernet network. The Wireless Network Name
(SSID), WEP and other settings need to be
exactly the same for all computers and devices on
the wireless network.

CE Declaration of Conformity

For the following equipment:
54 Mbps Wireless Access Point
(Product Name)
WG602
(Model Designation)
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States related to Electromagnetic Compatibility
(89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC). For the evaluation regarding the Directives, the following standards were applied:
ETS 300 328:1996-11+A1:1997-07
ETX 300 826: 1997-11
EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997
Déclaration de conformité CE
Il est certifié que l'équipement suivant :
54 Mbps Wireless Access Point
(nom du produit)
WG602
(deésignation du modele)
est conforme aux exigences définies par la Directive du Approximation of the Laws of the
Member States related to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive
(73/23/EEC) and the Amendment Directive (93/68/EEC). For the evaluation regarding the
Directives, the following standards were applied:
ETS 300 328:1996-11+A1:1997-07
ETX 300 826: 1997-11
EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997
!
0768
!
0768
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg602v1 - wireless access point

Table of Contents